Garden Table on Lawn: Which Leg Shape Does Not Sink
You want to place a table directly on the lawn, but after a short time the legs sink in and the surface becomes uneven. This problem occurs quickly, especially with heavy tables or damp ground. The choice of the right leg shape and contact surface determines whether your table stands stable or needs to be realigned after each use.
Why Narrow Legs Sink into the Lawn
The pressure on the ground results from the weight divided by the contact surface. A table with four narrow legs, each 3 centimetres in diameter, has a total contact surface of approximately 28 square centimetres. With a total weight of 30 kilograms, this creates a pressure of over 1 kilogram per square centimetre. On soft or damp lawn, this is sufficient for the legs to sink several centimetres. Round metal legs or thin wooden feet intensify this effect because they create point loads.
Wide Contact Surfaces Distribute the Weight
Table legs with a wide base distribute the load over a larger area and prevent sinking. Ideal are legs with a square or rectangular cross-section from 8 by 8 centimetres or runner shapes that rest along their entire length. With Garden Furniture made of wood or metal, you should look for models with plinths or cross braces that create additional contact surface. A continuous runner distributes the weight linearly and is particularly suitable for longer tables from 180 centimetres in length.
Additional Supports for Better Stability
If you already own a table with narrow legs, support plates or foot extensions help. Suitable are flat plastic or wooden discs with at least 15 centimetres in diameter, which you place under each leg. Alternatively, you can use patio slabs made of concrete or natural stone, which you set slightly into the lawn. This method also works for changing locations, as the slabs can be easily repositioned.
Material Choice and Weight Distribution
Lightweight aluminium tables with hollow legs sink faster than solid wooden tables because the total weight is lower and the wall thickness of the legs is usually only a few millimetres. However, heavy tables made of solid wood or cast iron also require wide contact surfaces, as their high weight increases the pressure per square centimetre. The selection of Garden Furniture, Stoves and Decoration includes various constructions where the leg shape is already adapted to different surfaces.
Practical Guidelines for Contact Surface
For stable standing on lawn, the total contact surface of all legs should be at least 200 square centimetres. For a four-legged table, this corresponds to approximately 50 square centimetres per leg, for example a square surface of 7 by 7 centimetres. The softer the ground, the larger the surface should be. On sandy or clay subsoil, values from 80 square centimetres per leg are recommended to prevent sinking even with prolonged use.
Related products: Garden Fountains, Chairs, Display Cabinets. baroque mirrors. The complete range: Baroque Furniture.
Related categories: Garden Fountains, Chairs, Display Cabinets. The full range: Baroque Furniture.
Read more: Bed Under a Sloped Ceiling: Which Side for the Headboard, Display Cabinet with Lighting: Which Lamp Does Not Discolour Porcelain, Casa Padrino Baroque Coffee Tables, Magnificent Coffee Tables for a Luxurious Living Room, Casa Padrino Luxury Baroque Armchairs, Exclusive Baroque Armchairs for Elegant Luxury Interiors, Casa Padrino Unveils Its New Luxury Hotel Furniture Collection




